The pipe benders of the type series XOT are electromechanical machines where can be bent in addition of standard pipes
thin-walled pipes a closed profiles by means of mandrel. The machine is steered by the control unit of the company ELGO,
type P 9521. The screen function takes the three-line display. The bending itself is performed on the basis of entered
bending angles in number of 1 to 99. The entered bending angles can be adjusted by portable control system. With simple
arrangement can be altered the bending direction (right - left). The bending machine was conceived as based on the
following requirements: simple service, max. performance in consideration of the machine dimensions and variability.
The bending machine is provided primarily for the single-part production.
XOT 50 B
-
electromechanical
XOT 110
-
electromechanical
Programmable values
-
size of bending angle
-
function
-
"Repeat"
Standard accessories
-
control panel
-
CE certificate
Special accessories
-
Extension back arm
-
Manual positioner for three-dimension pipe bending
-
Wheels below the machine
-
Customized tools
Basic technical parameters:
XOT
50 B
110
Max. dimension of bent tube Dxt (at Re=245 MPa) /mm/
50 x 3
108 x 4
Min. dimension of bent tube Dxt /mm/
6 x 1
20 x 1
Max. dimension of bent tube Dxt (at Re=295 MPa) /mm/
45 x 3
89 x 4
Max. bending radius Roh /mm/
300
330
Max. Roh with pressure die a=180° /mm/
200
330
Max. Roh with pressure rollers /mm/
300
400
Min. Roh of thick-walled tubes at max. dimension of bent tube /mm/
2 D
2,5 D
Max. dimension of square section (at Re=245 MPa) /mm/
40 x 40 x 3
80 x 80 x 5
Max. radius of square section /mm/
300
330
Max. bending angle /°/
190
190
Min. bending angle /°/
5
5
Max. bending speed / °/s /
25
14
Installed input of the machine /kW/
3,5
7,5
Dimensions:
- length /mm/
565
4 100
- width /mm/
1 144
860
- height /mm/
1 341
1 180
Working height /mm/
1 235
1 050
Weight /kg/
600
2 700
Position measure accuracy of bending /°/
± 0,1
± 0,1
Max. length of bent tube without mandrel
unlimited
unlimited
Max. lenght of tube from tool axle to backstop of clamping part in positioner /mm/
-
3 000
Max. length of bent tube with mandrel and with rear arm /mm/
