Application
The pipe benders of the type series XOT are electromechanical machines where can be bent in addition of standard pipes thin-walled pipes a closed profiles by means of mandrel. The machine is steered by the control unit of the company ELGO, type P 9521. The screen function takes the three-line display. The bending itself is performed on the basis of entered bending angles in number of 1 to 99. The entered bending angles can be adjusted by portable control system. With simple arrangement can be altered the bending direction (right - left). The bending machine was conceived as based on the following requirements: simple service, max. performance in consideration of the machine dimensions and variability. The bending machine is provided primarily for the single-part production.
Programmable values- size of bending angle
- function
- "Repeat"
|
Standard accessories
|
Special accessories
- Extension back arm
- Manual positioner for three-dimension pipe bending
- Wheels below the machine
- Customized tools
|
Basic technical parameters:
|
XOT 50B
|
Max. dimension of bent tube Dxt (at Re=245 MPa) /mm/
|
50 x 3
|
Min. dimension of bent tube Dxt /mm/
|
6 x 1
|
Max. dimension of bent tube Dxt (at Re=295 MPa) /mm/
|
45 x 3
|
Max. bending radius Roh /mm/
|
300
|
Max. Roh with pressure die a=180° /mm/
|
200
|
Max. Roh with pressure rollers /mm/
|
300
|
Min. Roh of thick-walled tubes at max. dimension of bent tube /mm/
|
2 D
|
Max. dimension of square section (at Re=245 MPa) /mm/
|
40 x 40 x 3
|
Max. radius of square section /mm/
|
300
|
Max. bending angle /°/
|
190
|
Min. bending angle /°/
|
5
|
Max. bending speed / °/s /
|
25
|
Installed input of the machine /kW/
|
3,5
|
Dimensions:
|
|
- length /mm/
|
565
|
- width /mm/
|
1 144
|
- height /mm/
|
1 341
|
Working height /mm/
|
1 235
|
Weight /kg/
|
600
|
Position measure accuracy of bending /°/
|
± 0,1
|
Max. length of bent tube without mandrel
|
unlimited
|
Max. lenght of tube from tool axle to backstop of clamping part in positioner /mm/
|
-
|
Max. length of bent tube with mandrel and with rear arm /mm/
|
In dependence on extension back arm length
|
XOT 50B - Tube bending machine - Electromechanical
|